|
| 2019-11-11 来源： 中国石化新闻网 |
 |
 |
石化新闻 |
|
中国石化新闻网讯 据11月8日AzerNews报道，阿塞拜疆国家石油公司的项目SOCAR Polymer LLC，将于2023年达到高密度聚乙烯生产的满负荷状态。 据当地媒体报道，根据最新的政府预测，到2019年底，该项目的工厂将生产4.82万吨高密度聚乙烯和11万吨聚丙烯。 与此同时，SOCAR Polymer项目的高密度聚乙烯产量将在2020年达到9.74万吨，2021年达到11万吨，2022年达到11.5万吨，2023年达到12万吨，达到了高密度聚乙烯的满负荷生产能力。 在聚丙烯生产方面，2020年，SOCAR Polymer项目产量将达到14万吨，2021年达到15万吨，2022年达到16万吨，2023年达到17万吨。 2018年7月，SOCAR Polymer项目委托建造了一座聚丙烯工厂。该项目设计额定生产能力为产18.4万吨/年。2019年2月项目投产生产高密度聚乙烯工厂，年产12万吨成品。 一般而言，该项目的设计目标是生产10种聚丙烯和4种高密度聚乙烯产品。该项目的总投资费用估计为8.16亿美元。俄罗斯天然气工业银行已经为该项目提供了4.89亿美元的贷款，为期10年。 SOCAR Polymer项目是由国有国家石油公司SOCAR建立的，从里海阿塞拜疆陆上和海上的部分油田生产石油和天然气。 目前，SOCAR在公司资本中的份额为52.2%。其他股东分别有维托尔黑海公司(Vitol Black Sea V.L.)L (19%)， PASHA Holding (9.9%)， Ecoland (9.8%)， Polimer Investment(5%)和AKKIK(4.1%)。 邹勤 摘译自 AzerNews 原文如下： SOCAR Polymer to operate at full capacity in 2023 The SOCAR Polymer LLC, a subsidiary of Azerbaijan's state oil company, will reach full capacity in the production of high density polyethylene in 2023. According to the updated government forecasts, by the end of 2019, 48,200 tons of high density polyethylene and 110,000 tons of polypropylene will be produced at the company's plants, local media report. Meanwhile, the high density polyethylene production at the SOCAR Polymer plant will amount to 97,400 tons in 2020, 110,000 tons in 2021, 115,000 tons in 2022, and 120,000 tons in 2023. Thus, in 2023, the plant will reach full capacity in the production of high density polyethylene. As to the production of polypropylene, SOCAR Polymer will increase production to reach 140,000 tons in 2020, to 150,000 tons in 2021, 160,000 tons in 2022, and 170,000 tons in 2023. In July 2018, SOCAR Polymer commissioned a polypropylene plant. The design capacity of the plant is 184,000 tons of polypropylene per year. In February 2019, the company put a plant for the production of high density polyethylene into operation with a capacity of 120,000 tons of finished products per year. In general, SOCAR Polymer plants are designed to produce 10 types of polypropylene and 4 types of high density polyethylene. The total investment costs of the project are estimated at $816 million. The credit in the amount of $489 million has been allocated to SOCAR Polymer by Russian Gazprombank for a period of 10 years. SOCAR Polymer was established by SOCAR, the state-owned national oil company, producing oil and natural gas from onshore and offshore fields in the Azerbaijani section of the Caspian Sea. Currently, SOCAR's share in the company’s capital amounts to 52.2 percent. Other shareholders are Vitol Black Sea V.L.L (19 percent), PASHA Holding (9.9 percent), Ecoland (9.8 percent), Polimer Investment (5 percent) and AKKIK (4.1 percent).
|
